Learn how to drive an automatic car driving?
Many people wonder about how to drive a car with an automatic gearbox. Therefore, I wanted to convey some
important information about the automatic car and how to drive it.
Driving an automatic car is simpler than driving a car with a regular gearbox but it is indispensable to learn to drive a car with a regular gearbox.
For an automatic car, there are four basic options or lanes, which are P, R, N,
The function of each of them is as follows:
– P is used to hold the car in place when leaving the car parked anywhere,
and it is the same purpose that we get when engaging in the “normal” car. At any gear when
parked to prevent it from moving, but the P position does not engage the gear with the motor, so
the car can be rotated at this position.
– R and this is used to move the car backward
– N, which is the neutral position, meaning there is no interlock, whether for parking or otherwise, such as in the
normal gearbox when there are no interlocking gears and the car can also be rotated at this
– D It is used to move the car forward, and in this situation the fate changes, automatic driving lessons the forward speeds with himself, and you as a driver have only to press the gas or
brake pedal and control the car
. Now when driving the car, what do you do!!
1- When cranking the engine, the gearbox must be in position P or N, because
only these two positions can rotate the engine, Cheap automatic driving lessons Coventry. Either R and D, or any other position, the car cannot be rotated
because the car simply separates the electricity from the sprinkler and the
rotation process does not take place.
2- When the gearbox is in the P position and you want to move the car backward, the gear shift is
directly to the R position without going through the N position because the N position is located after
the R position in driving.
3- When the gearbox is in the N position and you want to move the car backward, the gearbox is shifted
directly to the R position, and it must be ensured that the car is completely stopped, i.e. there is no movement
in the car before switching driving, just like a normal gearshift, so that no damage occur to
4- When the gearbox is in the P position and you want to move the car forward, the gear shift is
directly to the D position by passing through the R and N positions, and this is normal.
5- When the transmission is in the N position and you want to move the car forward, the transmission is shifted
Directly to position D
6- When you want to move the car backward while it is in position D, you must make sure that the car is
completely stopped, i.e. there is no movement in the car before switching, just like a regular gearbox,
so that no damage occurs to the gearbox, then switch from D, then N, and R.
7- As for the opposite, it is the opposite. As for making sure that the car is completely stopped, it is not necessary,
but as a kind of precaution, driving automatic driving lesson Birmingham the car must be in a state of stopping, or if there is a
slight backward movement, I think it does not harm.
8- About stopping at traffic lights, it is preferable to put the car in the N position, especially with the
long period, so that there is no load on the gearbox, engine, and brakes.
9- When parking the car between cars, high instructions are used during parking,
and when the parking is complete, it is preferable to put the gear on P so that the car does not move.
10- When starting the movement of the car while it is parked between the cars,
the brakes must be used when changing between the positions of the gears so that the car does not move sudden movements, as the automatic cars driving move automatically after putting the gear on R or D, where you find
the car as if it is pressing the gasoline with itself at a small rate so as not to Turn off the engine.
There are other modes in cars with automatic gearboxes:
they are either L and 2 in some types or 1, 2, and 3 in other types, and their function is
the process of determining the gears that the gears perform.
– The L or 1 position is intended to run the car in first gear only without
changing to other gears.
– Mode 2 is intended for the car to run in the first or second gear and change
between them only.
Mode 3 Its purpose is to drive the car on the first driving, second, or third speed,
and change between them only without the fourth,
and the purpose of these modes is to determine the speed of the car in places where the speed is limited,
for example, or to climb very high hills, for example, with mode L or 1, where the speed is
slow and the torque is strong.
Likewise, it is not necessary to change between these modes, as well as between mode D, except when
the speed at which the car is traveling is within the limits of the speed allowed by the mode or less
when you want to change it so that it does not cause damage to the gear like the normal gear
as well while driving.
In driving, As for rotating the car when the battery is empty, it can only be cycled by
connecting it to another car or a new battery, as it is not possible to drive the car.
Turn the car through it, as the configuration of the automatic transmission differs from the normal one.
In case of any questions or concerns do contact JUST PASS School of Motoring.
Company name: Just Pass School of Motoring
Contact us at +44 800 073 0789
Or Email: [email protected]
Address: 109 Percy Rd, Birmingham B11 3NQ, United Kingdom
Recommended Article: How To Bring in Cash From Instagram?